The control unit of the SMART evacuation system distributes audio signals to the individual zones and monitors the correct operation of the entire system. It also detects and reports any faults that may appear in the system and is responsible for activating up to 4 backup amplifiers in case any of the main amplifiers fail. It is equipped with great flexibility that allows optimizing the equipment and also the operating costs, both in smaller and larger structures as well as in dispersed groups of buildings.
In addition to an audio input and output matrix, both analog and digital, the SMART-CU control unit includes an advanced DSP with limiters, delays, feedback suppressor, and independent equalizers for inputs and/or outputs, a network switch, and the possibility of integration with other devices via programmable GPI/O inputs and outputs. It also provides direct access to the management and monitoring function of the entire system via the touch LCD screen.
The SMART system is based on a Master-Master topology through a redundant fiber optic ring connection, meaning that each of the different nodes in the installation equipped with a control unit is capable of performing evacuation scenarios independently if the connection with the rest of the nodes is lost.
| FEATURES: | Fully network-based system that enables configuration, control and diagnostics via Ethernet. Possibility to manage up to 254 devices on the network. Expansion capacity: 8 slots available for control cards and 4 slots available for function cards. 4'5" resistive LCD touch screen with 272x480 resolution. It has an audio card with 4 inputs and 12 outputs. 8 messages played simultaneously in different zones. Up to 32 GB of SD flash memory dedicated to the playback and recording of messages (48 kHz, 16 bits). More than 20 minutes of messages. Supports up to 12 monitored amplifiers. Programmable inputs and outputs GPI/O. Integrated DSP with 3-band parametric equalizer implemented on all control unit inputs, 8-band parametric equalizer, delay, audio limiter and feedback suppressor on each audio outputs. Integrable through own protocol or YELLOW software with third-party systems. |
| RESPONSE: | 40 Hz - 20 kHz (@1dB) 400 Hz - 8 kHz (@0'1dB) |
| INPUTS: | 4 Audio input 50/100V of the SMART-PA amplifier, euroblock 4 audio inputs from the ABT audio manager, RJ45 2 GPI, euroblock 1 LAN: Interconnection of equipment, RJ45 1 LAN PoE: Interconnection of PoE powered equipment, RJ45 1 LAN/WAN: Network connection, RJ45 2 FIBER: Safety connection (redundant ring) for SC/LC connectors. SPF connector |
| OUTPUTS: | 8 audio outputs to ISLE, 2x RJ45 2 GPO, euroblock 1 RS485 control of the audio manager ABT, RJ45 1 power supply 48 V CC, euroblock |
| SIGNAL/NOISE RELATION: | > 90 dB |
| DISTORTION: | THD+IMD: < 0'05% |
| TEMPERATURE: | Operation: 0°C / +60°C Storage: -20°C / +70°C |
| HUMIDITY: | Operating temperature: 15% to 80% (without condensation) Storage: 15% to 80% (non-condensing) |
| POWER SUPPLY: | 48 V CC provided by the SMART-PSM power supply manager, Euroblock Tension range: 40 - 57 V CC Consumption: Up to 100 W (depends on configuration) |
| DIMENSIONS: | 482 x 85 x 325 mm depth, 2U 19" rack |
| WEIGHT: | 8 kg |
Technical Documentation |
Nombre | Formato | Idioma |
|---|---|---|---|
|
- |
- |
Pictures |
Nombre | Formato | Idioma |
|---|---|---|---|
|
ZIP |
- |
|
|
|
ZIP |
- |
Do you need technical assistance?
Contact us and we will reply as soon as possible
Do you need assistance?
We believe that simple solutions are the best approach to complex problems and that each project requires its own plan. If you need assistance, fill in the form below and we will contact you.
RESOURCE CENTER
SHARE IT BY